Upgrade V60 video phone with USB device

If you will upgrade the video phone V60 to the specific firmware, you can refer to the below steps:
1. Put the firmware in your USB device;
2. Plug the USB device into the video phone;

1

3. Press two keys at the same time when you power on the V60 IP phone

2

4. The phone will go to recovery mode, we can press up and down key to choose the second option:

update from USB equipment. Then clicks OK key.

3

5.Choose the firmware file and click OK button:

4

6.The phone will start to upgrade.

5

7.After it finishes upgrading, we can reset the factory settings:

6

7